Read this website's Legal Guidelines and make sure you understand the risks of this repair. Place your Microsoft Zune HD on a clean flat and soft surface, such as a rubber mat or a piece of soft cloth and get the required opening tools
Step 2
This zune HD has a broken glass and lcd.
Step 3
There are 4 screws on the back of the zune HD that need to be removed.
Step 4
Every corner on the back of the zune has a screw.
Step 5
Step 6
Step 10
With all the screws removed you can now take off the backplate. This exposes the motherboard. First thing you want to disconnect is the battery so you have no electrical current running through the motherboard while diss-assembling it.
Step 13
This is what the zune HD looks like when you remove the backplate.
Step 12
There are 3 torx screws on the motherboard make sure they are removed.
Step 15
Here is another torx screw
Step 16
Here is the final torx screw holding the zune HD motherboard in place.
Step 17
Use the green tool to gently life teh motherboard away from the frame.
Step 18
There are a couple clips that needs to be released in order to get the zune HD logicboard out of the frame. Use a flathead to release them so it comes out easier.
Step 19
The battery can be lifted out using the green tool wedge it slightly below to lift it out. There is double sided tape so take your time and ease it out.
Step 20
Do the same for the other end to lift it up.
Step 21
This is what the zune HD logicboard looks like when fully taken apart from lcd/front frame.
