Treo 755 - How To Open

2009-04-15T03:42:22Z

Before you begin

Read the legal guidelines on this website. Place your Apple Treo 755 on a clean flat and soft surface, such as a rubber mat or a piece of soft cloth and get the required opening tools

Step 1

Remove the battery door.

Step 2
Remove the battery and take note of the Torx T5 screws holding the Treo backplate in place. Remove the Stylus.

Step 3
Remove the four Torx T5 screws.

Step 4
This is what it looks like when the screws are removed. Note the one of the screws is only visible if the stylus is removed.

Step 5
Pry open the cover for the external antenna you will find the last screw underneath. It is covered with a warranty seal.

Step 6
After taking off the backplate open the keyboard connector latch.

Step 7
Now you should be able to separate the midboard from the the Treo Frontplate.

Step 8
Slide the plastic tool or flathead under the tape covering the screen connector latch.

Step 9
Use the opening tool to carefully flip open the screen connector latch and take out the screen. You have successfully disassembled your Treo 755.

How to disassemble a PDA

2010-01-31T23:37:05Z

Before you begin

Read this website's Legal Guidelines and make sure you understand the risks of this repair. Place your Palm PDA on a clean flat and soft surface, such as a rubber mat or a piece of soft cloth and get the required opening tools

Step 2

Step 3

Step 4

Step 5

Step 6

Step 7

Step 8

Step 9

Step 10

Step 11

Step 13

Step 12

Step 15

Palm Treo

Treo 755 - How To Open

How to disassemble a PDA