Read the legal guidelines on this website. Place your Apple Treo 755 on a clean flat and soft surface, such as a rubber mat or a piece of soft cloth and get the required opening tools
Step 1
Remove the battery door.
Step 2
Remove the battery and take note of the Torx T5 screws holding the Treo backplate in place. Remove the Stylus.
Step 3
Remove the four Torx T5 screws.
Step 4
This is what it looks like when the screws are removed. Note the one of the screws is only visible if the stylus is removed.
Step 5
Pry open the cover for the external antenna you will find the last screw underneath. It is covered with a warranty seal.
Step 6
After taking off the backplate open the keyboard connector latch.
Step 7
Now you should be able to separate the midboard from the the Treo Frontplate.
Step 8
Slide the plastic tool or flathead under the tape covering the screen connector latch.
Step 9
Use the opening tool to carefully flip open the screen connector latch and take out the screen. You have successfully disassembled your Treo 755.
Read this website's Legal Guidelines and make sure you understand the risks of this repair. Place your Palm PDA on a clean flat and soft surface, such as a rubber mat or a piece of soft cloth and get the required opening tools
