Before you begin Read this website's Legal Guidelines and make sure you understand the risks of this repair. Place your Garmin Nuvi 5000 on a clean flat and soft surface, such as a rubber mat or a piece of soft cloth and get the required opening tools
		Turn your Garmin Nuvi 5000 on its back.
		Step 2 Remove the battery door and the battery.
		Step 3 Remove the screws under the battery compartment.
		Step 4 Remove the screws on top of the battery compartment.
		Step 5 Turn the Garmin Nuvi 5000 around and pry off the microphone cover at the top using a plastic opening tool. Remove any screws you find underneath.
		Step 6 Turn the Garmin Nuvi 5000 around again and remove the antenna cover using the spudger as shown in the image.
		Step 10 Remove the torx screws you find under the antenna cover.
		Step 13 Now the plastic frame should come loose from the Garmin Nuvi 5000 midboard.
		Step 12 This is what it looks like when the frame is removed.
		Step 15 Release the antenna cable from the Garmin Nuvi 5000 logic board.
		Step 16 Release the Garmin Nuvi 5000 keyboard connector.
		Step 17 Now you can lift the logic board as shown in the image.
		Step 18 The keyboard becomes fully exposed.
		Step 19 Release the Garmin Nuvi 5000 screen connector.
		Step 20 Now the Garmin Nuvi 5000 logic board is fully disconnected.
		Step 21 This is what is looks like when the logic board is remove from the frontplate.
		Step 22
		Step 23
		Step 24
		Step 25
		Step 26
		Step 27
		Step 28
		Step 29
		Step 30
		Step 31
		Step 32
		Step 33
		Step 34
		Step 35
		Step 36
		Step 37
		Step 38
		Step 39
		Step 40