Read this website's Legal Guidelines and make sure you understand the risks of this repair. Place your Garmin Nuvi 360 on a clean flat and soft surface, such as a rubber mat or a piece of soft cloth and get the required opening tools
Turn your Garmin Nuvi 360 on its back.
Step 2
Remove the battery door and the battery.
Step 3
Remove the screws under the battery compartment.
Step 4
Remove the screws on top of the battery compartment.
Step 5
Turn the Garmin Nuvi 360 around and pry off the microphone cover at the top using a plastic opening tool. Remove any screws you find underneath.
Step 6
Turn the Garmin Nuvi 360 around again and remove the antenna cover using the spudger as shown in the image.
Step 10
Remove the torx screws you find under the antenna cover.
Step 13
Now the plastic frame should come loose from the Garmin Nuvi 360 midboard.
Step 12
This is what it looks like when the frame is removed.
Step 15
Release the antenna cable from the Garmin Nuvi 360 logic board.
