Faster Answers

Is it a major job to replace the cracked screen on my tomtom go 910 and where do i get instructions please?
Thank you,
Robert.

We will post a guide for it within the next two weeks (http://www.portatronics.com/guides). However, all you a have to do is remove the torx screws on the back and pry on the front (between the silver frame and the plastic backlate). The screen module will release from the backplate. Gently remove it and watch the ribbon cable, it is paper thin. Push the screen connector latch away from the connector and the ribbon cable will come loose. Release the Microphone connector as well and you can set the screen module aside. The LCD is glued onto the bezel, carefully ease it off and and replace it with a new module.